MetriOps organizes the whole flow of a verification: type approvals, reception, bench evaluations, results and certificates with a QR code. Everything in one place, fully traceable.
Built for metrology laboratories working under ISO/IEC 17020.
Example case
120 meters · example customer
A21-004815
DN 15 mm
A21-004816
DN 15 mm
A21-004817
DN 20 mm
A21-004818
DN 20 mm
A21-004819
DN 25 mm
Indication error
Bench 2 · Q3
Certificate issued
VI-2026-00001
Every step is recorded and every value has a clear origin, from the first check to the final document.
Record the approval or homologation with its validity and what it covers. When you define the characteristics of a meter, the lists only offer what is allowed and warn you about any deviation.
Open a case, import hundreds of meters at once, review the preview and confirm. No pasting row by row.
Visual inspection, static pressure and indication error with their tolerances. Calculation rules are defined once and applied the same everywhere.
Each certificate comes from the stored results, with its sequential number and a QR to check its validity. What is issued is not edited: it is corrected with a new version.
Who did what and when is recorded. Sensitive operations leave a trace, ready for an audit visit.
Invite coordinators, inspectors and reception staff. Each person sees and does only what applies to them.
A laboratory cannot afford a doubtful number or a record that changes without notice. MetriOps was designed around that demand.
Define services, tolerances, numbering, type approvals and the characteristics of the meters you handle.
Open the case, import the meters and record each evaluation with its readings and results.
Generate the certificates and give your customer a QR code to check their validity.
Sign in with your account. If your laboratory is not on MetriOps yet, the team sets it up with you.
Sign in